The 180-degree shutter rule: shutter speed for every frame rate, flicker, and ND filters
The 180-degree shutter rule sets the shutter speed at 1 over double the frame rate: 1/48 s at 24 fps, usually rounded to 1/50 s, 1/60 s at 30 fps and 1/120 s at 60 fps, rounded to 1/125 s. It gives the motion blur audiences read as natural. In bright light, keep it with ND filters.
The rule in one line
Set the shutter speed to 1 over double your frame rate. At 24 frames per second that is 1/48 second. Each frame is exposed for half of the 1/24 second it lasts on screen, and the motion blur that results is the look audiences have read as "cinema" for a century.
What you can do today: film the same hand wave three times at 24 fps, at 1/50, 1/200 and 1/1000 s. Play them back. The first looks smooth, the last stutters like a flip book. That is the whole case for the rule.
Shutter speed by frame rate
| Frame rate | 180-degree shutter | Setting on most cameras |
|---|---|---|
| 23.976 fps | 1/47.95 s | 1/50 s |
| 24 fps | 1/48 s | 1/50 s |
| 25 fps | 1/50 s | 1/50 s |
| 29.97 or 30 fps | 1/60 s | 1/60 s |
| 48 fps | 1/96 s | 1/100 s |
| 50 fps | 1/100 s | 1/100 s |
| 59.94 or 60 fps | 1/120 s | 1/125 s |
| 120 fps | 1/240 s | 1/250 s |
| 240 fps | 1/480 s | 1/500 s |
For slow motion the rule follows the capture rate, not the playback rate: 120 fps footage played at 24 fps still wants 1/250 s.
Shutter angle, explained
Cinema cameras set the shutter as an angle. The exposure time is the angle divided by 360, divided by the frame rate: t = angle ÷ (360 × fps). At 24 fps:
| Shutter angle | Exposure time | Look |
|---|---|---|
| 45 degrees | 1/192 s | Sharp, staccato motion |
| 90 degrees | 1/96 s | Crisp, a little nervous |
| 144 degrees | 1/60 s | Near normal, flicker-free at 60 Hz |
| 172.8 degrees | 1/50 s | Normal, flicker-free at 50 Hz |
| 180 degrees | 1/48 s | The standard |
| 270 degrees | 1/32 s | Soft, smeared motion |
| 360 degrees | 1/24 s | Dreamy blur, one stop brighter than 180 |
Angles have one big advantage: change the frame rate and the look stays the same, because the camera recalculates the time for you.
Flicker: why 172.8 and 144 degrees exist
Lights on mains power pulse at twice the mains frequency: 100 times a second in 50 Hz countries such as most of Europe, 120 times a second in 60 Hz countries such as the US. If the shutter does not catch a whole number of pulses, frames come out slightly brighter and darker and the picture throbs.
- 50 Hz: use 1/50 or 1/100 s. At 24 fps that is 172.8 degrees.
- 60 Hz: use 1/60 or 1/120 s. At 24 fps that is 144 degrees.
Cheap LED bulbs and some screens can flicker even at these speeds. Test a few seconds of footage before the take.
Keeping 180 degrees in daylight: ND filters
Locking the shutter at 1/50 s takes away one side of the exposure triangle. Outdoors, with a wide aperture for shallow focus, there is far too much light. Neutral density (ND) filters take it away without changing the colour, in theory.
Worked example: you shoot at ISO 800, the base of many video cameras, in direct sun. The sunny 16 rule says f/16 at 1/800 s. You want f/2.8 at 1/50 s. From f/16 to f/2.8 is five stops more light; from 1/800 to 1/50 s is four more. Nine stops too much: you need a nine-stop ND, density 2.7.
| Density | Name | Stops | Light passed |
|---|---|---|---|
| 0.3 | ND2 | 1 | 50% |
| 0.6 | ND4 | 2 | 25% |
| 0.9 | ND8 | 3 | 12.5% |
| 1.2 | ND16 | 4 | 6.25% |
| 1.5 | ND32 | 5 | 3.1% |
| 1.8 | ND64 | 6 | 1.6% |
| 2.1 | ND128 | 7 | 0.8% |
| 2.4 | ND256 | 8 | 0.4% |
| 2.7 | ND512 | 9 | 0.2% |
| 3.0 | ND1000 | 10 | 0.1% |
Each 0.3 of density is one stop. Densities add when you stack filters: 0.9 plus 0.6 is 1.5, five stops. Cheap filters often let infrared through and tint the image magenta or brown, and variable NDs can soften the picture or cross-hatch at their darkest setting. Buy fewer, better filters.
How much light 180 degrees needs
Indoors the problem flips: you need enough light for your stop at 1/50 s. Cinematographers plan it in foot-candles. Kodak's data for its 500T motion picture film, at EI 500, 24 fps and 180 degrees, lists the light needed per stop:
| Stop | f/1.4 | f/2 | f/2.8 | f/4 | f/5.6 | f/8 | f/11 | f/16 |
|---|---|---|---|---|---|---|---|---|
| Foot-candles | 5 | 10 | 20 | 40 | 80 | 160 | 320 | 640 |
| Lux | 54 | 108 | 215 | 431 | 861 | 1,722 | 3,444 | 6,889 |
A shorter memory rule from set: 100 foot-candles gives f/2.8 at ISO 100. Each doubling of ISO halves the light you need, so ISO 800 wants about 12.5 foot-candles at f/2.8.
Meter each lamp at the actor's position, in foot-candles or lux. If the key reads 40 foot-candles and you are at ISO 500, you can shoot at f/4. To convert between the two units, use the lux to foot-candle converter, and for how meters read light on set, see light meter.
When to break the rule
- Action and tension: 45 to 90 degrees freezes each frame, so motion looks jerky and urgent. Fight scenes and sports cams often do this.
- Very low light: 360 degrees, a shutter of 1/24 s at 24 fps, gains one stop over 180. Motion smears, which can read as dreamy or drunk.
- Slow motion: keep 180 degrees at the capture rate, or go a little narrower for crisper water and sparks.
- Stills-video hybrids: if the camera only offers 1/50 or 1/60 s, use the one that matches your mains frequency.
Whatever you choose, choose it for the look. Raising the shutter because the scene is too bright is the one reason never to break the rule: that is what ND is for.
Questions people ask
What is the 180-degree shutter rule?
It is the convention of setting the shutter speed to 1 over double the frame rate, so each frame is exposed for half the time between frames. At 24 fps that is 1/48 s. The name comes from film cameras, whose rotating shutter disc was open for 180 of its 360 degrees.
What shutter speed should I use for 24 fps?
1/50 s on most mirrorless and stills cameras, which do not offer 1/48 s. The difference is tiny: 1/50 s is a 172.8-degree shutter, and it is also the flicker-free choice under 50 Hz mains lighting. Under 60 Hz lighting in North America, 1/60 s avoids flicker.
What shutter speed for 30 fps and 60 fps?
1/60 s for 30 fps and 1/120 s for 60 fps, which most cameras round to 1/125 s. For 120 fps slow motion, use 1/250 s, and for 240 fps, 1/500 s. The rule always lands on double the frame rate.
Do I have to follow the 180-degree rule?
No. It is a default that looks natural. A faster shutter, 45 to 90 degrees, gives crisp, jittery motion for action and tension. A slower one, up to 360 degrees, smears motion and gains a stop of light in very dark scenes. Break it on purpose, not because the scene is too bright.
Sources
- Wikipedia: Shutter angle Exposure time = angle / (360 x frame rate); 180 degrees is considered normal; 1/50 s at 24 fps is about 173 degrees.
- Wikipedia: Neutral-density filter Optical density, stops and naming (0.3 = ND2 = 1 stop, 3.0 = ND1000 = 10 stops) and the colour cast risk of cheap filters.
- Kodak Vision3 500T technical data Foot-candles needed per f-stop at EI 500, 24 fps and a 180-degree shutter: 20 fc at f/2.8, doubling per stop.
- Neil Oseman: How big a light do I need? The set rule of thumb: 100 foot-candles is f/2.8 at ISO 100, and the shutter is usually 1/48 or 1/50 s.
Made by EASYTECH, who also make LightMeter Pro.