Light meter: what it measures, the types, and how to use one step by step
A light meter measures the light in a scene and turns it into camera settings: you enter your ISO, it gives an exposure value and matching pairs of aperture and shutter speed. Incident meters read the light falling on the subject, reflected meters read the light bouncing off it. A phone app does the reflected job.
What a light meter actually does
A light meter measures the light in a scene and turns it into settings you can dial in. You tell it the ISO of your film or sensor. It answers with an exposure value (EV) and a list of aperture and shutter pairs that all let in the same amount of light. On a sunny day at ISO 100, f/16 at 1/125 s, f/11 at 1/250 s and f/8 at 1/500 s are the same exposure. You pick the pair that gives the depth of field or the motion you want.
Every meter is built to make what it reads come out as a middle grey. Point it at a grey wall and it is right. Point it at snow and it turns the snow grey. That single fact explains every mistake a meter makes and every correction on this page.
What you can do today: open a meter app on your phone, tap a patch of grass or grey pavement in the same light as your subject, and compare its suggestion with what your camera picks. If the two agree within a third of a stop, you already have a second opinion you can trust.
The five types of light meter
| Type | What it reads | Best for | Where it struggles |
|---|---|---|---|
| Handheld incident (white dome) | Light falling on the subject | Portraits, products, film, video lighting | Subjects you cannot walk up to, like a far mountain |
| Handheld reflected | Light bouncing off the scene toward you | General scenes, landscapes | Snow, black subjects, backlight |
| Spot meter (about 1 degree) | A tiny patch you aim at | Zone system, stage, landscapes with big contrast | You must choose the right patch |
| In-camera meter (matrix, centre-weighted, spot) | Reflected light through the lens | Everyday shooting | Same traps as any reflected meter |
| Phone light meter app | Reflected light through the phone camera on iPhone; the ambient light sensor in most Android lux apps | Old film cameras, scouting, a second opinion | Accuracy varies by phone until you check it once |
Two specialist meters sit beside these. Flash meters catch the brief burst of a strobe. Colour meters read colour temperature in kelvin for matching lights and gels. A lux meter for lighting work is an incident meter with a flat sensor that reports lux instead of f-stops.
Incident or reflected: the choice that matters most
An incident meter sits at the subject and reads the light arriving there, so the colour of the subject does not matter. A reflected meter reads what comes off the subject, so a white dress pushes it toward underexposure and a black coat toward overexposure. In a classic demonstration, a reflected meter gave f/32 for a white plate, f/16 for a grey one and f/8 for a black one under the same light. An incident reading gave f/16 for all three, and all three came out the right tone.
Our full comparison, with a table of which mode to use in which scene, is in incident vs reflected metering.
How to use a light meter, step by step
- Set the ISO. The box speed of your film, or the ISO set on your camera. Change one and you must change the other.
- Decide what you care about. Depth of field means you fix the aperture. Freezing or blurring motion means you fix the shutter speed.
- Take the reading. Incident: stand at the subject, in the same light, dome pointed at the camera lens. Reflected: aim at a mid-tone in the same light as the subject, like green grass, grey stone, weathered wood or a grey card.
- Read the pair. Lock the value you chose in step 2 and read the other one off the meter.
- Correct for the scene (reflected readings only). Snow or a white beach: add 1.5 to 2 stops. A mostly black subject: take away 1 stop. A backlit face metered from the camera: add 1 stop.
- Set the camera and shoot. On film, bracket one stop either side when the light is tricky. On digital, check the histogram once and trust the meter after that.
The meter gives you an exposure; the exposure triangle is how you spend it. To see every equivalent pair at once for a reading, use the exposure calculator.
Using a light meter for film photography
Film has no screen to check, so the meter carries the whole job. Three rules cover most rolls.
- Colour negative: meter for the shadows. Negative film forgives overexposure far better than underexposure. When unsure, give one stop more. Kodak's own daylight table for Portra 400 asks for f/11 at 1/500 s in bright sun, one stop more than the strict sunny 16 setting.
- Slide film: protect the highlights. Slide film has little room on the bright side, so meter the brightest area that needs detail and work from there.
- Long exposures need extra time. Past about 1 second, film loses sensitivity and needs more time than the meter says. HP5 Plus metered at 10 s needs about 20 s. The tables by film are in reciprocity failure.
Many beautiful old cameras have a dead or missing meter. A phone app plus the sunny 16 rule as a sanity check is all they need.
Using a light meter for video
On a film set the shutter is fixed by the frame rate, usually 1/48 or 1/50 s at 24 fps, so the meter is used to set the lens stop and to plan how much light each lamp must deliver. Cinematographers think in foot-candles. Kodak's data sheet for its 500T motion picture stock, at EI 500, 24 fps and a 180-degree shutter, asks for 20 foot-candles at f/2.8, doubling for each stop: 40 at f/4, 80 at f/5.6. A common memory rule on set is 100 foot-candles for f/2.8 at ISO 100. More in the 180-degree shutter rule.
Phone light meters: what they do well
Most iPhone meter apps read the light through the camera, so they behave like a reflected spot meter you can aim with your finger. Most Android lux apps use the ambient light sensor next to the screen instead. On recent phones in even light, photographers' side-by-side tests found camera-based apps within about a third of a stop of a handheld meter. Older phones and backlit scenes drift further, so check yours once against a known reading. The method, and what four lab tests found, is in is a phone light meter accurate.
The trick for incident-style readings with a phone: meter a grey card held in front of your subject, filling the frame. No card? Meter your palm in the subject's light and open up one stop.
Why two good meters can disagree
Meters are calibrated with a constant, and makers do not all pick the same one. For reflected readings most use K = 12.5 and some use 14, about a sixth of a stop apart. For incident readings a flat diffuser uses C = 250 and a dome is often set near 340, close to half a stop apart. Add tone mapping on a phone and a sixth of a stop here and a third there is normal. A difference of one stop or more means one of the two is reading the wrong patch or the wrong light.
Common mistakes
- Metering the sky. A bright sky in the frame drags a reflected reading down and leaves faces dark. Tilt down or tap the subject.
- Measuring in the wrong light. An incident reading taken in shade for a subject standing in sun is off by several stops. Stand where the subject stands.
- Forgetting the ISO. You loaded ISO 400 film and the meter is still set to 100: every frame is two stops over.
- Trusting one reading in high contrast. Take a reading of the shadows and one of the highlights. If they are more than five or six stops apart, decide which end you will sacrifice.
Questions people ask
What is the point of a light meter?
It tells you which aperture and shutter speed will expose a scene correctly at your ISO, before you take the picture. That matters most on film, where there is no screen to check, and in light that fools a camera, like snow, stage lighting or a backlit face. It also lets you plan lighting in foot-candles or lux.
What unit does a light meter measure in?
A photographic meter shows exposure value (EV) and f-stop and shutter pairs for your ISO. A lux meter shows illuminance in lux, or foot-candles in the US, where 1 foot-candle is 10.76 lux. Many meters and apps show both, and at ISO 100 one converts to the other: EV 15 is about 82,000 lux.
Can I use my phone as a light meter for photography?
Yes. A light meter app reads the light through the phone camera and gives you EV and camera settings, which is all a film camera without a working meter needs. Check it once against a known reading and it stays consistent from then on. It reads reflected light, so meter a mid-tone or a grey card.
Is there a free light meter app?
Yes. Several meter apps are free to download, including LightMeter Pro on iPhone, which reads EV, lux, foot-candles and colour temperature from the camera and solves your exposure settings. Plans and offers for extra features are shown in the store.
Is a lux meter the same as a light meter?
A lux meter is a kind of light meter. It measures illuminance, the light falling on a surface, and reports lux for lighting, plants or workplaces. A photographic light meter turns the same kind of measurement into aperture and shutter settings. An incident photo meter with a flat diffuser is close to a lux meter.
Sources
- Wikipedia: Light meter Meter types, the K and C calibration constants used by different makers, and why reflected meters fail on unusual scenes.
- Wikipedia: Exposure value The EV formula, the incident and reflected equations from ISO 2720, and typical EV values by scene.
- Wikipedia: Metering mode Average metering on snow underexposes by 2 stops or more; how spot metering behaves on a backlit face.
- Kodak Vision3 500T 5219/7219 technical data Foot-candles needed per f-stop at EI 500, 24 fps and 180 degrees, and the instruction to meter an 18 percent card in front of the subject.
- Vujica Herzog et al. 2022, DAAAM: Comparison between lux meter apps and illumination measuring devices iPhones measure light with the camera, Android lux apps with the ambient light sensor; per-phone deviations tested against a reference meter.
Made by EASYTECH, who also make LightMeter Pro.