The exposure triangle: aperture, shutter speed and ISO, with the trade-offs and worked examples

The exposure triangle is the three settings that set a photo's brightness: aperture (how wide the lens opens), shutter speed (how long it stays open) and ISO (how much the signal is amplified). Each moves brightness in stops, one stop doubling or halving it, and each has a cost: depth of field, motion blur or noise.

The triangle in one sentence

Aperture and shutter speed decide how much light reaches the sensor. ISO decides how much that signal is amplified. Together they set how bright the photo looks, and the triangle is a reminder that you cannot move one without paying for it with another.

The trick that makes it easy: all three are counted in stops. One stop doubles or halves the brightness. Open the aperture one stop and you can make the shutter one stop faster and get the same picture. That is the whole game.

What you can do today: put your camera in manual, find a setting that looks right, then open the aperture one stop and make the shutter one stop faster. The brightness stays the same. Do it three times and you will never forget how the triangle works.

The three scales, one stop per step

ApertureShutter speedISO
f/1.41/4000 s100
f/21/2000 s200
f/2.81/1000 s400
f/41/500 s800
f/5.61/250 s1600
f/81/125 s3200
f/111/60 s6400
f/161/30 s12800

Each row is one stop from the next. Shutter speeds and ISO simply double. The f-numbers grow by about 1.4 each step, because the f-number describes the width of the hole and the area grows with its square. Cameras also offer thirds between these values (f/3.2, f/3.5, 1/160 s, ISO 125), and three thirds make one stop.

Aperture: light and depth of field

The aperture is the opening in the lens. A small f-number means a wide opening: f/2 lets in four times more light than f/4. Its side effect is depth of field, the zone that stays sharp in front of and behind the point you focus on.

  • f/1.4 to f/2.8: shallow depth, blurred background. Portraits, low light.
  • f/5.6 to f/8: most of a group or a street scene sharp.
  • f/11 to f/16: front to back sharpness for landscapes. Past f/16 fine detail softens a little from diffraction, more on small sensors.

Shutter speed: light and motion

The shutter speed is how long light reaches the sensor. Its side effect is motion: a fast shutter freezes, a slow one smears.

  • 1/1000 s and faster: sport, birds, splashing water frozen.
  • 1/250 s: people walking, kids who will not sit still.
  • 1/60 s: the slowest most people can hold a normal lens steady. A handy rule for handheld shots is one over the focal length: 1/100 s at 100 mm.
  • 1/4 s to several seconds: silky water, light trails, night scenes on a tripod.

For video the shutter is usually fixed by the frame rate, at double the frame rate: see the 180-degree shutter rule.

ISO: brightness and noise

Doubling the ISO doubles the brightness from the same light. Its cost is noise and lost detail in the shadows. Modern cameras stay clean well into the thousands, but extra light always beats extra ISO. Treat ISO as the side you move last, when the aperture is already wide and the shutter cannot get slower without blur.

The trade-offs at a glance

MoveBrightnessWhat it costsUse it when
Open the aperture one stop (f/4 to f/2.8)+1 stopShallower depth of fieldPortraits, low light
Close the aperture one stop (f/8 to f/11)-1 stopMore depth, slight softening past f/16Landscapes, groups
Slow the shutter one stop (1/250 to 1/125 s)+1 stopMore blur from motion and shakeStill subjects, tripod
Speed up the shutter one stop-1 stopFreezes motionSport, kids, wind
Raise ISO one stop (400 to 800)+1 stopMore noiseThe other two are at their limit
Lower ISO one stop-1 stopCleaner fileBright light, tripod

Four worked examples

1. Portrait in full sun. At ISO 100 the sunny 16 rule gives f/16 at 1/125 s. You want a soft background at f/2.8. From f/16 to f/2.8 is five stops more light (f/11, f/8, f/5.6, f/4, f/2.8), so the shutter must be five stops faster: 1/250, 1/500, 1/1000, 1/2000, 1/4000 s. If your camera tops out at 1/2000 s, use ISO 50 or a one-stop ND filter.

2. Your kid in the living room at night. Home interiors sit around EV 5 to 7 at ISO 100. Take EV 6: at f/2.8 that is about 1/8 s, far too slow for a moving child. You want 1/125 s, four stops faster, so raise ISO four stops: 200, 400, 800, 1600. Final setting: f/2.8, 1/125 s, ISO 1600.

3. A silky waterfall under cloud. Overcast is about EV 13 at ISO 100: f/16 at 1/30 s. You want 1 second to smooth the water. From 1/30 s to 1 s is five stops (1/15, 1/8, 1/4, 1/2, 1). The aperture is already at f/16 and ISO 100 is the floor, so add a five-stop ND filter, density 1.5 (often sold as ND32).

4. Street photography at dusk. You fix 1/250 s to freeze walkers and f/5.6 for depth. The meter says the scene is EV 9 at ISO 100. At f/5.6 and 1/250 s you need EV 13, so you are four stops short: ISO 1600. Grain or noise is the price of sharp people at dusk, and it is usually worth paying.

Where the light meter fits

A meter, or a meter app on your phone, measures the scene and gives you one number, the exposure value. Every combination below is the same exposure at EV 12 and ISO 100, an overcast day:

Aperturef/2.8f/4f/5.6f/8f/11f/16
Shutter1/500 s1/250 s1/125 s1/60 s1/30 s1/15 s

The meter tells you the row; the triangle is how you choose a column. The exposure value chart lists the EV of common scenes, and the exposure calculator builds this table for any reading.

The triangle in the camera's auto modes

Aperture priority (A or Av) lets you fix the aperture and the camera picks the shutter. Shutter priority (S or Tv) is the reverse. Auto ISO lets the camera move the third side when the other two are fixed. Exposure compensation, the plus and minus dial, shifts the whole result by stops when the meter is fooled by snow, a white wall or a dark stage.

Mistakes that cost the most photos

  • Fixing ISO low out of habit. A sharp photo at ISO 3200 beats a blurred one at ISO 200.
  • Chasing f/1.4 for groups. At very wide apertures, faces at the back of a group fall out of focus. Use f/4 to f/5.6.
  • Forgetting the shutter when you stop down. f/16 for a landscape at dusk can push the shutter to a second or more. Use a tripod or open up.
  • Reading brightness off the screen. Phone and camera screens are bright. Check the histogram or meter the scene.

Questions people ask

What are the three components of the exposure triangle?

Aperture, shutter speed and ISO. Aperture is how wide the lens opens, shutter speed is how long light reaches the sensor, and ISO is how much the signal is amplified. Change one by a stop and you must change another by a stop the other way to keep the same brightness.

Is f/2.8 or f/4 better?

Neither; they do different jobs. f/2.8 lets in twice the light of f/4, one full stop, and gives a shallower depth of field, good for portraits and low light. f/4 keeps more of the scene sharp, good for two or three faces at different distances. Pick by how much you want in focus.

What is the formula for exposure?

Photographers use exposure value: EV = log2(N squared / t), where N is the f-number and t the shutter time in seconds. f/16 at 1/125 s and f/8 at 1/500 s both come out near EV 15, the same exposure. Each step of ISO doubling lets you shoot one EV darker at the same settings.

Which setting should I choose first?

The one that matters most for the picture. Portraits and landscapes start with the aperture, because depth of field defines them. Sport, kids and pets start with the shutter speed, because blur ruins them. ISO comes last: raise it only when the other two have reached their limit.

Does ISO really change exposure?

Strictly, no. Exposure is the light that reaches the sensor, set by aperture and shutter. ISO sets how much that signal is brightened afterwards. In practice it behaves like the third side of the triangle, which is why the model is useful, but extra light always gives a cleaner file than extra ISO.

Sources

Made by EASYTECH, who also make LightMeter Pro.