Lux to lumens: how to convert, with the area formula and real rooms

To convert lux to lumens, multiply the lux by the area in square metres: 300 lux over 12 square metres is 3,600 lumens. To go from lumens to lux, divide the lumens by the area. In feet, lumens equal foot-candles times square feet. Real rooms lose light, so buy bulbs with about half as much again.

You know your desk should get 500 lux. The bulb box only lists lumens. Converting between them takes one multiplication, plus one honest correction that most calculators skip. Here is the formula, a table you can read in seconds, and four rooms worked out in full.

The formula

Lux is lumens per square metre. So:

  • Lumens = lux × area in square metres
  • Lux = lumens ÷ area in square metres

In US units the same idea uses square feet and foot-candles:

  • Lumens = foot-candles × area in square feet
  • Foot-candles = lumens ÷ area in square feet

And to switch systems, 1 foot-candle equals 10.764 lux. The foot-candles to lux guide has a full table.

Quick table: lumens needed by room size and target lux

These are the lumens that must land on the surface. Read across from your room size to your target.

Room area100 lux150 lux300 lux500 lux
5 m² (54 ft²)500 lm750 lm1,500 lm2,500 lm
10 m² (108 ft²)1,000 lm1,500 lm3,000 lm5,000 lm
15 m² (161 ft²)1,500 lm2,250 lm4,500 lm7,500 lm
20 m² (215 ft²)2,000 lm3,000 lm6,000 lm10,000 lm
30 m² (323 ft²)3,000 lm4,500 lm9,000 lm15,000 lm

In feet:

Room area10 fc20 fc30 fc50 fc
100 ft²1,000 lm2,000 lm3,000 lm5,000 lm
150 ft²1,500 lm3,000 lm4,500 lm7,500 lm
200 ft²2,000 lm4,000 lm6,000 lm10,000 lm
300 ft²3,000 lm6,000 lm9,000 lm15,000 lm

Not sure which target to pick? Lux levels by room lists them for every space, with the standard behind each.

The correction real rooms need

The formula assumes every lumen from the bulb lands on the floor or the desk. It never does. Lampshades trap some light, fittings point some at the ceiling, and walls absorb part of what hits them. Lighting designers handle this with a utilisation factor: the share of bulb lumens that reaches the work surface. In an ordinary room with light walls it often sits around half to two-thirds. Dark walls, deep shades and high ceilings push it lower; retail lighting guides add 10 to 20 percent more lumens for dark matte walls alone.

A practical rule for homes:

  • Shaded ceiling lights or table lamps: buy about 1.5 times the formula.
  • Dark walls, high ceilings or heavy shades: buy about twice the formula.
  • A task lamp close to a desk or counter: losses are small, so the formula plus a little is enough.

Then measure. The reading tells you in ten seconds whether the margin was right.

Four rooms worked out

Bedroom, 3 × 4 m

  • Area: 12 m². Target: 150 lux of general light.
  • Formula: 150 × 12 = 1,800 lumens on the floor.
  • With shades: about 2,700 lumens of bulbs. Three 800 lumen bulbs come close, plus a bedside lamp for reading.

Kitchen, 4 × 3 m with a 3 m counter

  • General light: 12 m² × 200 lux = 2,400 lumens, so about 3,600 lumens from ceiling fittings.
  • Counter: 3 m × 0.6 m = 1.8 m². At 500 lux that is 900 lumens on the worktop. Under-cabinet strips sit close to the surface, so 1,000 to 1,200 lumens of strip does it.

Desk, 1.2 × 0.6 m

  • Area: 0.72 m². Target: 500 lux.
  • Formula: 500 × 0.72 = 360 lumens on the desk top.
  • A desk lamp of 450 to 800 lumens aimed at the surface covers it, with the room's own light filling the space around.

US living room, 12 × 14 ft

  • Area: 168 ft². Target: 15 foot-candles.
  • Formula: 15 × 168 = 2,520 lumens on the floor.
  • With shades: about 3,800 lumens of lamps spread around the room.

Lumens to lux: what a bulb really gives you

Run it backwards to see why so many rooms feel dim. One 800 lumen bulb in a 10 m² room gives 80 lux at most in theory. With the shade and walls taking their share, expect around 50 lux at table height: hallway level, in a room you want to read in.

The reverse formula only works for light spread across a room. For a single lamp shining on one spot, distance decides everything, and lux falls to a quarter each time the distance doubles. Lumens vs lux explains that with candela and a distance table.

Choosing bulbs from your lumen target

Bulbs are sold by lumens now, with old-watt equivalents on the box. ENERGY STAR's equivalents: 450 lumens replaces a 40 W bulb, 800 replaces 60 W, 1,100 replaces 75 W and 1,600 replaces 100 W. Split the total across several sources rather than one bright bulb: light from three or four points gives fewer shadows and less glare than one fitting doing everything.

Measure before and after

The formula gets you close. A reading gets you right.

  1. Measure the room as it is: four readings at table or desk height, averaged.
  2. Work out the gap: target lux minus measured lux, times the area, times your margin.
  3. Add that many lumens, and measure again.

A room that reads 60 lux against a 150 target in 12 m² is short by 90 × 12 = 1,080 lumens on the floor, so about 1,600 lumens of new bulbs with shades. The lumens calculator does this arithmetic for any room, and how to measure lux gives the steps for readings you can trust.

Questions people ask

What is 1 lux in lumens?

One lux is one lumen spread evenly over one square metre. So lux only turns into lumens once you know the area: 1 lux over 10 square metres is 10 lumens, and 300 lux over the same 10 square metres is 3,000 lumens landing on the surface.

How many lumens do I need for a room?

Multiply the room's area by its target lux. A 12 square metre bedroom at 150 lux needs 1,800 lumens on the floor, so about 2,700 lumens of bulbs with shades. A kitchen of the same size at 200 lux needs about 3,600 lumens of bulbs, plus counter lights.

How bright is 100 lux?

100 lux is dim: about the light of a very dark overcast day, or a hallway. It is enough to move around and find things, but too little for reading, cooking or desk work, which want 300 to 500 lux on the surface.

How bright is 20 lux?

20 lux is very dim, the level of a public area with dark surroundings. Home measurements found a median of about 23 lux at the eye in living rooms in the evening, which suits winding down before bed but strains the eyes for reading.

How many lux is 800 lumens?

It depends on the area. 800 lumens spread over 1 square metre give 800 lux; over 10 square metres, 80 lux at best. A single 800 lumen ceiling bulb in a 10 square metre room usually measures around 50 lux at table height once shade and wall losses are counted.

Sources

Made by EASYTECH, who also make LightMeter Pro.