Exposure calculator: aperture and shutter from sunny 16, EV or lux

In bright sun, set f/16 and a shutter speed of one over your ISO: f/16 at 1/400 or 1/500 for ISO 400. Each step darker, from hazy to cloudy, overcast and open shade, opens one stop. With a meter reading, every aperture and shutter pair at the same EV gives the same exposure.

Light comes in steps, and every camera setting moves in the same steps. Once you know how bright the scene is, the rest is arithmetic: pick the aperture you want for depth of field and the calculator gives the shutter speed, at any ISO. Start from the conditions (the sunny 16 table), from an EV your meter shows, or from a lux reading taken at the subject.

Find your settings

Exposure · sunny 16 · EV · lux

Shutter at f/8

1/2000

EV 15 at ISO 100 = EV 17 at ISO 400. Exact time 1/2048

Sunny 16 says: f/16 at 1/400 (the shutter closest to 1/ISO). Every pair below gives the same exposure.

Equivalent settings at ISO 400
ApertureShutterExact
f/1.41/66873faster than 1/8000
f/21/32768faster than 1/8000
f/2.81/16718faster than 1/8000
f/41/80001/8192
f/5.61/40001/4180
f/81/20001/2048
f/111/10001/1083
f/161/5001/512
f/221/2501/271

The sunny 16 table

The rule works without any meter: in direct sun, set the aperture to f/16 and the shutter to one over your ISO. Darker conditions open the aperture one stop per step.

Light on the subjectShadowsAperture at 1/ISOEV at ISO 100
Snow or sand in bright sunDark, sharpf/2216
Bright sunSharp edgesf/1615
Hazy sunSoft edgesf/1114
Cloudy brightBarely visiblef/813
Heavy overcastNonef/5.612
Open shade or sunsetNonef/411

Backlit subject: open one more stop. The direct-sun rows hold from about two hours after sunrise to two hours before sunset; closer to the ends of the day the light drops fast. For every scene beyond sunny 16, from street lights to the full moon, see the exposure value chart.

How the calculator gets there

Exposure value is a single number for a pair of settings: EV = log₂(N² / t), where N is the f-number and t the shutter time in seconds. f/16 at 1/125 is EV 15, and so are f/8 at 1/500 and f/4 at 1/2000. One EV is one stop, a doubling or halving of light.

ISO shifts the EV. Each doubling of ISO adds one: EV 12 at ISO 100 becomes EV 14 at ISO 400. The calculator does this for you and then solves the shutter for each aperture: t = N² ÷ 2^EV.

Worked example. Heavy overcast is EV 12 at ISO 100. At ISO 400 that is EV 14. At f/8: t = 64 ÷ 16,384 = 1/256 s, so set 1/250. At f/2.8: t = 7.84 ÷ 16,384 = 1/2,090 s, so set 1/2000.

From lux. An incident reading of the light falling on the subject converts with lux = 2.5 × 2^EV at ISO 100, the calibration most handheld meters use for a flat sensor. 800 lux is about EV 8.3; 10,000 lux is about EV 12.

Which pair to choose

Every row of the table gives the same brightness. They differ in how the picture looks:

  • Wide aperture (f/1.4 to f/2.8): shallow depth of field, a blurred background, fast shutter speeds. Portraits, low light.
  • Middle aperture (f/5.6 to f/8): most lenses are sharpest here and enough of the scene is in focus. Street, travel, groups.
  • Small aperture (f/11 to f/22): deep focus from foreground to horizon, slow shutter speeds. Landscapes, architecture.
  • Shutter for motion: 1/500 or faster freezes running people and pets; around 1/60 is the slowest most people hand-hold with a normal lens; for video, the 180-degree shutter rule sets the shutter from the frame rate.

The exposure triangle covers the trade-offs between aperture, shutter and ISO in depth.

When the numbers need a correction

  • Snow and bright sand fool any reflected meter, which tries to make the whole frame mid-grey: the picture comes out about 2 stops too dark. Use the sunny 16 value, or meter and open up 1 to 2 stops.
  • Backlight puts the subject in shadow against a bright background: open one stop from the sunny 16 value, or meter the face up close.
  • Long exposures on film need extra time past about 1 second because film loses sensitivity in dim light. The calculator flags these; reciprocity failure has the correction by film.
  • Reflected versus incident. A reading of the light falling on the subject ignores how dark or bright the subject is, which is why it handles snow and black cats correctly. Incident vs reflected metering explains when to use each.

Questions

What shutter speed should I use at ISO 400 in sun?

1/400 at f/16 by the sunny 16 rule, or 1/500 if your camera has no 1/400 setting. The same exposure at f/8 is 1/2000, and at f/5.6 it is 1/4000.

How do you calculate exposure?

Find the exposure value of the scene, with a meter or the sunny 16 table, add one EV for each doubling of ISO above 100, then pick an aperture. The shutter time is the f-number squared divided by 2 to the power of that EV.

Can I use my phone as a light meter for photography?

Yes. A phone meter reads the scene through its camera and gives an EV, which is all you need for a starting exposure. Meter the subject rather than the sky, and correct for snow, backlight and very dark scenes as you would with any reflected meter. Is a phone light meter accurate shows how to check yours.

Is the sunny 16 rule still useful with a digital camera?

It is the fastest sanity check there is. If your camera's meter suggests something far from sunny 16 on a sunny day, the meter is being fooled by a bright sky, snow or a dark subject. On film cameras without a working meter, it is often the whole exposure method.

Keep going

Sources

Made by EASYTECH, who also make LightMeter Pro.