Lux to PPFD calculator: the right factor for your light
Multiply lux by the factor for your light: 0.0185 for sunlight, about 0.0143 for a 4000 K white LED, 0.0171 for 3000 K, 0.0122 for HPS and 0.0135 for fluorescent. So 10,000 lux of sunlight is about 185 µmol/m²/s of PPFD. Red/blue grow lights have no reliable factor.
A lux meter tells you how bright a spot looks to you. Your plant does not care how it looks. It counts photons, and two lamps that read the same lux can deliver very different amounts of usable light. Use the sunlight factor on a 4000 K LED and you overstate the PPFD by about 30 %. Pick your light below and get the factor that fits it.
Convert your reading
Type the lux (or foot-candles) you measured where the leaves are, then pick the light that falls on that spot. To go the other way, switch to "PPFD to lux" and type the PPFD a plant guide or a lamp chart gives you.
Lux ⇄ PPFD · 12 light sources
Pick the light that falls on the spot. With mixed window and lamp light, pick the stronger one.
PPFD
71.5µmol/m²/s
Write it as a band: 57.2 to 85.8
Factor used: 0.0143 µmol/m²/s per lux, so about 70 lux per µmol/m²/s.
Medium light: low-light plants grow well here, and monstera, spider plant, calathea and orchids hold steady.
- DLI at 12 h a day
- 3.09 mol/m²/day
- DLI at 16 h a day
- 4.12 mol/m²/day
The factor for each light
PPFD = lux × factor. The factor is the number of µmol/m²/s that one lux carries under that light. The third column shows the same thing upside down, which is handy for mental maths: under sunlight, every 54 lux is about 1 µmol/m²/s.
| Light source | µmol/m²/s per lux | Lux per µmol/m²/s | 10,000 lux gives |
|---|---|---|---|
| Sunlight, outdoors or through a window | 0.0185 | 54 | 185 |
| White LED, 2700 K (warm) | 0.0181 | 55 | 181 |
| White LED, 3000 K | 0.0171 | 58 | 171 |
| White LED, 4000 K (neutral) | 0.0143 | 70 | 143 |
| White LED, 5000 K (daylight) | 0.0146 | 68 | 146 |
| White LED, colour temperature unknown | 0.015 | 67 | 150 |
| Fluorescent tube or CFL, cool white | 0.0135 | 74 | 135 |
| High-pressure sodium | 0.0122 | 82 | 122 |
| Double-ended HPS | 0.0130 | 77 | 130 |
| Metal halide | 0.0141 | 71 | 141 |
| Ceramic metal halide, 4200 K | 0.0154 | 65 | 154 |
| Red/blue LED (pink or purple glow) | no valid factor |
The sunlight, fluorescent, HPS and metal halide values come from published sensor-maker and extension tables. The white LED values by colour temperature come from lamp photometry and lab measurements, which put a neutral white LED close to 13.5 µmol/m²/s per 1,000 lux. The colour temperature is printed on the lamp box or the bulb base. If you have nothing to go on, 0.015 is a fair middle value for any white LED.
Why one number cannot fit every lamp
Lux weights light by how sensitive the human eye is to each colour. The eye is most sensitive to yellow-green and barely sees deep red. A photon of deep red at 660 nm, which plants use very well, counts for about 6 % of its photon value in a lux reading. So a lamp rich in red looks dim on a lux meter while it feeds the plant well, and a lamp rich in green looks bright while it feeds the plant less.
White LEDs, sunlight and fluorescent tubes all have broad spectra, so their factors sit within about 50 % of each other. Red/blue grow lights break the rule completely: the same 500 µmol/m²/s can read anywhere from about 15,000 to 33,000 lux depending on the mix. For those lamps, use the maker's PPFD chart at your hanging height, or a quantum meter.
How to read the result
Treat the PPFD as a band of about 20 % either side. If the calculator says 200, write down 160 to 240. Phone readings and cheap lux meters both carry that kind of spread, and the band keeps you from chasing a precise figure that the measurement cannot give.
| PPFD (µmol/m²/s) | What it means |
|---|---|
| Under 20 | Too dim for any plant to keep growing |
| 20 to 40 | Low light: snake plant, ZZ, pothos and peace lily hold steady |
| 40 to 80 | Medium light: monstera, spider plant, calathea, orchids hold steady |
| 80 to 160 | Bright indoor light: jade, succulents, African violets, ficus hold steady |
| 160 to 400 | Grow-light range: citrus, seedlings and herbs grow well |
| 400 to 1,000 | Strong grow light or outdoor sun: vegetables and fruiting plants |
| About 2,000 | Full summer sun at noon |
PPFD is an instant reading. What a plant really responds to is the total over the day, the daily light integral. The calculator shows the DLI at 12 and 16 hours of light; for any other schedule, and for the target band of your plant, use the DLI calculator.
Start from a good reading
The conversion is only as good as the lux you feed it. Three habits make the biggest difference:
- Measure at the leaves, aimed at the light. Hold the phone where the top leaves are, camera facing the window or lamp. A reading taken a metre away tells you about that spot, not about the plant.
- Turn the room lights off when you measure a grow lamp, and close the blinds if you want the lamp alone. Mixed window and lamp light has no single factor.
- Let the lamp warm up. LEDs settle in about 10 to 15 minutes, fluorescent tubes and HID lamps in 15 to 60.
A camera reads reflected light, so a dark leaf in the frame lowers the number. Switch to the front camera, lay a sheet of plain white printer paper flat over the lens, and hold the phone at leaf height with the screen facing the light. How to measure plant light with your phone walks through it step by step.
Questions
What is the difference between PPFD and lux?
Lux measures light the way the human eye sees it, with green and yellow counted most and deep red and blue barely counted. PPFD counts every photon plants can use between 400 and 700 nm, each one equally, in µmol per square metre per second. Plants grow on photons, so PPFD is the number that matters for them.
How many lux do plants need?
Low-light houseplants need about 270 to 1,100 lux at midday, medium-light plants 1,100 to 5,400, high-light plants 5,400 to 10,800, and sun lovers more than 10,800 for several hours. Those are the University of Florida foot-candle bands converted to lux.
What is 1,000 PPFD in lux?
About 54,000 lux under sunlight, 70,000 lux under a 4000 K white LED and 82,000 lux under high-pressure sodium. The same number of photons looks brighter or dimmer to the eye depending on the colour mix of the lamp.
How much lux is too much for plants?
Indoors, almost never. Full summer sun reaches about 108,000 lux, and only sun-loving plants that are used to it take that all day. Shade plants such as calathea, ferns and peace lily scorch in a few hours of direct summer sun through glass.
Can my phone measure lux for plants?
Yes, as a good estimate. A phone reads lux through its camera, so measure at the leaves, aim at the light, and keep the same spot and angle every time. Record the result as a band of about 20 % either side, then convert it to PPFD here.
Keep going
- Lux to PPFD explained: the factors in depth, with worked examples for windows and lamps.
- What is DLI: why the daily total matters more than any single reading.
- How much light do plants need: the four light bands in foot-candles, lux and DLI.
- Do you need a PPFD meter: when a lux reading and a factor are enough, and when they are not.
Sources
Made by EASYTECH, who also make LightMeter Pro.